Garrett Pro Pointer
Detecting West Australian Gold :: Minelab, Other Detectors & Coils :: Coils - Minelab, Coiltek, Nuggetfinder, General
Page 1 of 1
Garrett Pro Pointer
Wondering if anyone here has worked out a fix, or has seen a fix up vid for the Pro Pointer to
stop or at least decrease the the way it gets picked up by Minelab Pulse Dtectors ??
I know if i attached it to my shoulder the 11" Mono cant see it, but thats not practical for me,
i would tape it to the forehead but there's already one Probe attached
Gotta be a way to get around this problem surely so any help would be great at this stage..
Pete :.8:
PS ive got a coiltek doover also
stop or at least decrease the the way it gets picked up by Minelab Pulse Dtectors ??
I know if i attached it to my shoulder the 11" Mono cant see it, but thats not practical for me,
i would tape it to the forehead but there's already one Probe attached
Gotta be a way to get around this problem surely so any help would be great at this stage..
Pete :.8:
PS ive got a coiltek doover also
Guest- Guest
Re: Garrett Pro Pointer
Mine does the same Pete, but to the extent it can't be anywhere near the 45 so I can't take it with me on the gold.
There is a fix for them, I think a resistor? fitted in them does the trick. I have been meaning to send mine to a guy in Melbourne that has offered to mod it for a small fee.
There is a fix for them, I think a resistor? fitted in them does the trick. I have been meaning to send mine to a guy in Melbourne that has offered to mod it for a small fee.
Guest- Guest
Re: Garrett Pro Pointer
G'day Fella's
I just Did a simple 10 minute fix for the problem of the PP interference with the ML 4500 & 5000.
I went to the supermarket and got a $2.00 cheap can of womens deoderant.
i taped down the top to let the contents out and then cut off the top, leaving a cylinder thats
a perfect tight fit into the PP holster, just slid it down from the top of the holster into place, covered
it in black tape and Whamo! All Fixed..
No more problems with it making the 5000/Mono combo squeel..
[You must be registered and logged in to see this image.]
Pete
I just Did a simple 10 minute fix for the problem of the PP interference with the ML 4500 & 5000.
I went to the supermarket and got a $2.00 cheap can of womens deoderant.
i taped down the top to let the contents out and then cut off the top, leaving a cylinder thats
a perfect tight fit into the PP holster, just slid it down from the top of the holster into place, covered
it in black tape and Whamo! All Fixed..
No more problems with it making the 5000/Mono combo squeel..
[You must be registered and logged in to see this image.]
Pete
Guest- Guest
Re: Garrett Pro Pointer
Ok Pete, so what happens when you use the PP? Does it interfere with the 5000or do you have to turn the 5000 off?
Robert
Btw, have a read of this thread on the free forum. Particularly Mechanic's (mick) input.
[You must be registered and logged in to see this link.]
Robert
Btw, have a read of this thread on the free forum. Particularly Mechanic's (mick) input.
[You must be registered and logged in to see this link.]
Guest- Guest
Similar topics
» Garrett AT Gold and Garrett AT Pro ground balance differences in WA
» Pro find pin pointer
» super charge your pin pointer
» Garrett ATX
» Garrett ATX
» Pro find pin pointer
» super charge your pin pointer
» Garrett ATX
» Garrett ATX
Detecting West Australian Gold :: Minelab, Other Detectors & Coils :: Coils - Minelab, Coiltek, Nuggetfinder, General
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|